What should I do if my yearly colored contact lenses feel blurry?

If your yearly colored contact lenses feel blurry, it’s essential to address the issue promptly to ensure clear vision and eye comfort. Here are some steps you can take:

1. Check for Debris or Deposits: Blurriness in contact lenses can sometimes be caused by debris, deposits, or protein buildup on the lens surface. Remove the lenses and inspect them carefully for any visible deposits or particles. If you notice any, clean the lenses thoroughly using a multipurpose contact lens solution recommended by your eye care professional.
2. Rinse and Reinsert: If your lenses appear clean but still feel blurry, rinse them with sterile saline solution or multipurpose contact lens solution to remove any remaining debris or residue. Make sure to thoroughly rinse both sides of the lenses before reinserting them into your eyes.
3. Check for Proper Orientation: Colored contact lenses can sometimes become inverted or flipped inside out when handling or inserting them. Check the orientation of the lenses by placing them on the tip of your finger and inspecting the shape. If the edges of the lens curve outward, it is in the correct orientation. If the edges curve inward, gently flip the lens to the correct orientation before reinserting it.
4. Ensure Proper Fit: Improperly fitting contact lenses can cause blurriness and discomfort. Make sure your lenses are sitting properly on your eyes and are not too tight or too loose. If you suspect that the fit of your lenses may be causing blurriness, yearly colored contact lenses  remove them and consult your eye care professional for evaluation and adjustment.
5. Rehydrate Your Eyes: Dryness can also contribute to blurry vision while wearing contact lenses. Use lubricating eye drops or rewetting drops to hydrate your eyes and improve lens comfort. Apply a couple of drops to each eye and blink several times to distribute the moisture evenly across the lens surface.
6. Remove and Rest: If blurriness persists despite these measures, remove your contact lenses and give your eyes a break. Place the lenses in a clean contact lens case filled with fresh contact lens solution and allow your eyes to rest for a while. If your vision clears up after resting, it may indicate that your eyes were fatigued or dry.
7. Consult Your Eye Care Professional: If blurriness continues or worsens, it’s essential to consult your eye care professional for further evaluation. Blurry vision can be caused by various factors, including prescription changes, lens damage, or underlying eye conditions. Your eye doctor can assess your eyes and contact lenses, determine the cause of the blurriness, and recommend appropriate treatment or adjustments.

By following these steps and seeking guidance from your eye care professional, you can effectively address blurriness in your yearly colored contact lenses and ensure clear vision and eye comfort. Avoid ignoring persistent blurriness or discomfort, as it may indicate an underlying issue that requires attention from a qualified professional.

How should I clean my yearly colored contact lenses if I accidentally touch them with dirty hands?

If you accidentally touch your yearly colored contact lenses with dirty hands, it’s essential to clean them thoroughly before reinserting them into your eyes to avoid potential eye irritation or infection. Here’s what you should do:

1. Wash Your Hands: Before handling your contact lenses, wash your hands thoroughly with soap and water. Use a mild, fragrance-free soap and rub your hands together for at least 20 seconds, making sure to clean the fronts and backs of your hands, as well as between your fingers and under your nails. Rinse your hands thoroughly with clean water and dry them with a lint-free towel.
2. Remove the Lenses: Gently remove the colored contact lenses from your eyes using proper technique. Avoid squeezing or pinching the lenses excessively to prevent damage. If you accidentally touched the lenses with dirty hands while they were still in your eyes, remove them carefully to prevent transferring any contaminants to your eyes.
3. Inspect the Lenses: After removing the lenses, inspect them carefully for any visible debris, particles, or residue. Hold the lenses up to a light source and examine them closely to ensure they are clean and free from any foreign substances. If you notice any deposits or contaminants on the lenses, proceed to the next step to clean them.
4. Clean the Lenses: Place the lenses in the palm of your clean hand and apply a few drops of multipurpose contact lens solution recommended by your eye care professional. Gently rub each lens with your fingertip in a circular motion for about 20 seconds to remove any debris or deposits. yearly colored contacts  Be careful not to apply too much pressure to avoid damaging the lenses.
5. Rinse the Lenses: After cleaning the lenses, rinse them thoroughly with sterile saline solution or multipurpose contact lens solution to remove any remaining debris or cleaning solution. Hold the lenses under a gentle stream of solution or immerse them in a clean contact lens case filled with solution and swirl them around for a few seconds.
6. Inspect Again: Once the lenses are clean and rinsed, inspect them again to ensure they are free from any residue or contaminants. If you notice any remaining debris or cloudiness on the lenses, repeat the cleaning and rinsing process until the lenses are completely clean and clear.
7. Reinsert the Lenses: After cleaning and inspecting the lenses, you can safely reinsert them into your eyes. Use proper technique to avoid touching the lenses with your fingers or transferring any contaminants from your hands to your eyes. Make sure the lenses are oriented correctly before reinserting them.
8. Monitor for Discomfort: After reinserting the lenses, monitor your eyes for any signs of discomfort, irritation, or redness. If you experience persistent discomfort or if your eyes appear red or irritated, remove the lenses immediately and consult your eye care professional for further evaluation and guidance.

By following these steps, you can effectively clean your yearly colored contact lenses if you accidentally touch them with dirty hands and ensure safe and comfortable wearing experience. Remember to always wash your hands thoroughly before handling your contact lenses to minimize the risk of contamination and maintain eye health.