Take a look at our comprehensive ranges for effective plumbing and Gas Safe installation below. The information on those websites is not provided by Steel & Tube. Tighten the union nut until the point at which it becomes noticeably more di cult to turn the union nut. At this point, for example, minor damage on the thread caused by the union nut getting caught must be overcome.
The use of miter bend is restricted to the low-pressure water line. Applications include rotary and pipe fittings, adapters and couplings, hydraulic pipes and high pressure flanges. Whether you’re simply stocking up on plumbing fittings and repair parts or have a specific project in mind, Ace offers many types of pipe fittings made of different materials. Find your plumbing fitting solutions at Ace, then shop for other essential plumbing repair parts for your home needs. Coupling are also useful if the pipe is broken or leakage occurs.
Long elbows are used in low-pressure gravity-fed systems and other applications where low turbulence and minimum deposition of entrained solids are of concern. They are available in acrylonitrile butadiene styrene , polyvinyl chloride , chlorinated polyvinyl chloride , and copper, and are used in DWV systems, sewage, and central vacuum systems. This section discusses fittings primarily used in pressurized piping systems, though there is some overlap with fittings for low-pressure or non-pressurized systems. Specialized fittings for the latter setups are discussed in the next major subsection.
This generally requires that the piping and fitting are the same material. Skill is required to melt the joint sufficiently to ensure good fusion, while not deforming or damaging the pieces being joined. A trap primer automatically injects water into a trap, maintaining a water seal to keep sewer gas out of buildings.
Flanges used in piping (orifice, threaded, slip-on, blind, weld neck, socket, lap-joint, and reducing) are available with a variety of facings, such as raised, flat, and ring-joint. A barb , which connects flexible hose or tubing to pipes, typically has a male-threaded end which mates with female threads. The other end of the fitting has a single- or multi-barbed tube—a long tapered cone with ridges, which is inserted into a flexible hose. The nipple is a short stub of a pipe that has a male pipe thread at each end or at one end. The swage is like reducers but small in size and used to connect pipes to smaller screwed or socket welded pipes. Like reducers, they are also available in concentric & eccentric types.
We know that the likes of water pipe, fittings, water meters, hose etc. are not the most glamorous products in the world, but this doesn’t make a difference to us when it comes to customer service. Whether you’re looking for a simple adaptor or specifying a whole pipework system, you’ll get all of our expertise and professional courtesy. Before installation, make sure the valve is in the “open” position and all cemented surfaces are clean and dry.
Male adapters contain male threads and female adapters contains female threads. One end of adapter is plain which is glued or welded or soldered to the plain pipe end. These are connected when there are 4 pipes are meeting at a point. These fittings generate more amount of stress on pipe as the temperature changes, because they are located at the center of four connection points. Cross fittings are generally used for fire sprinkler systems.
Ace Rewards members spending $50 or more are eligible to receive free Next Day delivery on in-stock orders. Orders must be placed on days the store is open, before 4pm local time or 2 hours before store closing time, whichever is earlier. Just take a look at all that we have to offer, and if you can’t find what you need, please email us, and our Customer Service Specialists will happily assist you. Above a certain velocity, the laminar ow of the oil becomes a turbulent ow. Turbulent flows lead to greater heat generation in the system, with consequential losses of pressure and performance.
Fittings for central vacuum systems are similar to DWV fittings, but are usually of thinner and lighter construction because the weight of the materials conveyed is less. Vacuum-system designs share with DWV designs the need to eliminate internal ridges, burrs, sharp turns, or other obstructions which might create clogs. Non-return or check valves allow free flow of a fluid in one direction, but prevent its flow in a reverse direction. They are often seen in drainage or sewage systems, but may also be used in pressurized systems. Isolation valves are used to temporarily disconnect part of a piping system, to allow maintenance or repair, for example.