Polymer Analysis & Identification
Polymer Analysis & Identification

Members are provided with comprehensive ways to promote their products, maximizing product exposure and increasing return-on-investment. With the help of dedicated and hard working team of professionals, we are identified as a highly reputedimporter, distributor, exporter, and stockistin the Indian market. These personnel source products from reliable and trustworthy world reputed mfrs. In a short span of time, we have established ourselves in the local as well as global market. We have extensive experience with bioabsorbable polymers, polyurethanes, ultra-high molecular weight polyethylene, polyetheretherketone, nylons and other polymers that are used for implants or medical products. Contact us to learn more about our capabilities and experience with testing and analyzing plastics. SGS PSI has decades of experience solving complex challenges involving plastics.

There is an ever-increasing pressure to reduce the weight of plastics being used in packaging, but without compromising on strength and performance. We offer a wide breadth of packaging experience to help our clients deliver safe and effective products to market. Our services encompass consulting, package validation, material qualification and package development. Before undertaking an extractables and leachables analysis, our experts will make a comprehensive risk assessment of your product or device. This could include various factors - depending on your product - such as daily dose, administration route, toxicity classification, material contact, dosage form, patient population, duration and construction materials. Evaluate the optimum combination between seal time and seal quality in relation to production time of packages. His work at Mobil Chemical in the 1980’s contributed to the development of cast LDPE for food packaging and blown and cast LLDPE for flexible and industrial films including stretch wrap. We added a plate to our test box that is used to observe puncture propagated tear characteristics. This plate is 16″ square, 3/8″ thick, and extends out from 1 corner of the box 1.5″.

industrial ct scanner cost

Model Digital Micrometer combines a precise thickness measuring system with an easy-to-read digital display. The Elmendorf tear tester determines the force needed to continue the tearing of an initial cut in sheet materials. Aside from conventional plastic bags, we are committed to investing in the latest technology as an effort to reduce our carbon footprint on the environment. The introduction of Oxo-biodegradable additives helps the plastic degrade faster than standard plastic bags. Our Bags are made with high-grade and quality resin to sustain commercial requirements for strong packaging bags with extra strength and durability. If there is any form of leakage / pin hole in the package, air bubbles will rush out of the package. The bursting strength of combined board is primarily an indication of the character of the materials used in manufacturing a fiberboard box and has value in this respect. Bursting strength of a material is defined as the maximum hydrostatic pressure required to produce rupture of the material when a controlled and constantly increasing pressure is applied through a rubber diaphragm to a circular area. Go-to global leader and trusted partner for container closure integrity solutions.

Chemical - The pH value of materials chloride and sulphate in paper or board, alkalinity of glass, compatibility test with chemicals or medicaments are typical of the chemical tests. The testing procedures may be divided into two groups according to whether the test is applied to the packaging material in isolation or to the entire package. The instrument is used for testing the ink/print, marking and rub resistance of cartons, films, labels and commercial printed material. Qualitest offers a full range of Packaging Testing equipment for packaging film, adhesive tapes, plastics film, and much more. Questions pertaining to the use of recycled plastics in food packaging should be directed to the Office of Food Additive Safety (). Also, a description of any steps that are taken to ensure that the recyclable plastic is not contaminated at some point, either before collection for recycling, or during the recycling process. The government of different countries are executing strict regulations for maintaining a standard quality and safety of products by following standards such as ASTM , ISTA , ISO , and others. The single-column range fits neatly on your bench-top and is ideal for product testing applications according to your own test methods.

Glass containers with a hydrolytic resistance higher than that recommended for a particular type of preparation may generally also be used. A container should be designed so that the contents may be removed in a manner suitable for the intended use of the article in it. Environmental- Packages are subjected to conditions that reproduce the environment and some evaluation is made at suitable intervals. Such procedures may be applied to testing closures for water vapour transmission. InPneumatic Model, the clamping of the sample is done pneumatically from the pneumatic cylinder and hydraulic pressure is provided to the sample to measure its burst strength. Request more informationto see how we can help you with a packaging testing solution that suits your needs. The Hanatek CCP allows the user to produce production quality crease samples without committing valuable machine time.

FIT-01 can be used to determine impact resistance properties of pendulum of plastic films, sheets, composite films, aluminum foils and other materials in accordance with ASTM D3420. C640 Thickness Tester is a high precision mechanical contact method thickness tester, which can be used for thickness measurement of films, sheeting, paper, corrugated paperboard, textiles, non-woven fabrics, and solid insulation materials, etc. In case of testing vacuum leakage, the container, with the product is put in a vacuum sealed chamber and the pressure inside the chamber is dropped. If improperly manufactured, the walls of the packaging or the region of the seal will begin to leak. The slant leakage test checks different orientations of the package for leakage. Leakage tests allow manufacturers to see if the container can hold the product under different pressures or under different orientation. It is one of the important considerations in packaging material testing methods.

We provide to customers self-contained complete software, customizable design, fast delivery, etc. We are acknowledged as a high-tech company that has many technology patents as well as software certificates issued by national authority. Guangzhou Biaoji Packaging Equipment Co., Ltd. is an innovative and progressive business establishment in China that possesses great long-standing in designing, developing and producing an array of hi-tech testing equipment. In the method developed by VTT, cellulose polymers are split into shorter chains before adding fatty acids, improving the reactivity of the cellulose, making the resulting material more thermoplastic. At the same time, it gives better protection against water and it can be more easily heat sealed. The LIGHTHOUSE CO2 ingress method involves exposing a sample container to a CO2 atmosphere and then making a headspace measurement to detect trace amounts of CO2 that have ingressed through a leak. Offering a wide range of scientific & laboratory testing instruments such as Adhesive Testing Instruments, Moisture Meters, Abrasion Testers, Stiffness Tester, and more. If that testing goes well, the project will allow Mascaro customers to start including flexible plastics in their curbside collection containers. Materials Recovery for the Future , a research project aiming to tackle the vexing problem that plastic flexible packaging presents to traditional MRFs is entering some heavy-duty, real-world testing.

The sensor on the instrument will measure the amount of force which is required to burst the sample. The maximum force which is sensed by the machine is considered as the maximum bursting strength that a material can bear to its maximum. This also helps the manufacturers to decide the factor of safety for the materials that are packed inside and helps to measure the suitability of the material for the required application. It is a universal fact that most of the packaging products fail from the edges due to the excessive pressure on the material from inside. It means the excessive pressure of the products that are placed inside burst the material. To analyze the amount of weight or pressure that a material can tolerate before it fails, bursting strength test is performed on the packaging products. The Bursting strength test is performed on various materials such as papers, corrugated boxes, multi-layered boxes, paperboards, plastic films, laminated films and many more.

Sustainability Program Helping you find the sustainable packaging products that work best for your products. Making better decisions using the obtained information in regard to the design of the package and the distribution process. This is an important step in which the operator must ensure that the sample is not tilted to either side in order to obtain accurate results. Once this test has been performed and the exact dimensions of the samples to be tested have been determined, the ASTM D638 method outlines 5 sample types. The ASTM D638 method is applied to rigid plastic samples with sizes ranging from 1.00 mm to 14 mm thick. Simply complete the form below and the BPF will send your enquiry on to relevant companies who can supply the material you are looking for. Thermal testing consists of either measuring the HDT or VICAT softening point. PerkinElmer uses cookies to ensure that we give you the best experience possible on our website. If you continue without changing your settings, we will assume that you consent to receive cookies from this website. To learn more, please review our cookie policy, which includes information on how to manage your cookies.

The main attribute of the LDPE plastics is that they are very lightweight, thing and flexible yet have a substantial amount of strength that can bear a significant amount of weight and hence are used for making carry bags. These materials cannot be recycled but the products made from LDPE can be reused if they are not contaminated. Now, when we speak of testing, rigid packaging is something that needs extra care. Rigid packaging consists chiefly of hard plastic jars and bottles, aerosol bottles, aluminium bottles, glass jars and more. Even amongst these, rigid plastics make up a large share of packaging and containers. They are used in the food industry, the pharmaceuticals, as well as for a wide range of other products, such as cosmetics or stationery. Rigid packaging often comes in multiple parts – the caps and containers are separately manufactured. The quality control of components in pharmaceutical premises starts at the receiving stage. Being a manufacturer of packaging products, if you are looking for a high-quality testing machine that is used to measure the bursting strength of the thermoplastic films, then Bursting Strength Tester is the best device for you.

The purpose of this chapter is to determine whether a material has been well-characterized for its intended use and is designed to ensure that the material characteristics match the relevant performance requirements. Our consulting team has decades of experience in establishing protocols, test plans and justifications. We are here to provide regulatory assistance before, during and after your regulatory submission. We can provide gap assessments between final product configuration and standard method discrepancies. Extractables and leachables studies enable manufacturers to identify, quantify and identify the risk of leachable impurities migrating into a drug solution from container closure systems, processing equipment or packaging. This makes the successful examination of extractable and leachable substances extremely important for both the protection of patients and adherence to regulatory expectations. We differentiate ourselves by providing a high level of technical and personal service, and delivering top quality packaging solutions. PPT provides its customers with a wide array of Packaging formats, across a variety of attractive and growing markets. Being an industry leader in laminated and surface printed rollstock, PPT takes advantage of a vertically integrated system to provide excellent quality in pre-made pouches and bags.

Labthink providesLeak Test Apparatusfor bottles, pouches and bags of food, drugs, medical instruments, daily chemical products, cars, electronic components, stationeries and other industrial products. Testing equipment for measuring the physical properties of packaging materials. To take quality controlling at another level in the industry by introducing fast testing equipment. To help quality controlling companies by introducing high technology testing equipment. Once the research group has completed the fine-tuning of the traditional plastic film applications to suit the needs of packers, the focus of development work can be shifted to practical recycling concepts. The aim is to adapt the film to collection and recycling systems that are used on the main markets in the world. Backed up by state-of-the-art warehousing & packaging facilities, we, Khushboo Scientific Pvt. Ltd.,make sure of offering best scientific & laboratory testing instruments to the clients. SGS Polymer Solutions Incorporated is a trusted provider of plastic testing and plastic analysis across a wide range of industries and applications.

The whole idea of packaging materials for the products is not leaving the products uncovered and unprotected. As these products are stored or transported, they need to be stay protected from factors that may affect the integrity and safety of the products like the extreme forces that act upon them during handling. There are differences forces with different amplitude acting upon the products during different stages of delivery right from the storage to the transportation. These instruments can easily assess different aspects of their quality and give information about which aspects of quality need attention and can be improved. Plastic Packaging Testing Instruments, commonly used in food, medicine, medical equipment and other industries. Plastic packaging also directly affects the quality of products, so plastic packaging companies need a lot of testing equipment to confirm whether their plastic packaging is qualified. Among them, the tightness tester is a basic instrument necessary for plastic packaging manufacturers. Because the sealing performance of the package directly affects the shelf life and quality of the product. For example, Presto which is a one of the leading manufacturer of testing instruments based in India offers packaging testing equipment as per industrial standards. ‘Box Compression Tester’ is one the packaging testing equipment offered by company and it is ASTM D4169, ASTM D642, ISO compliant.

Leave a Reply

Your email address will not be published. Required fields are marked *